To use this method you’ll need to be able to create or cover a version of the thing that you are looking to make a mockup of, and have access to Adobe Photoshop.

This is a guide for using Photoshop to take a photo of a blank object and digitally apply art to it, preserving the photos lights and shadows to make a realistic Digital Mockup. The benefits of printing your own blank and then taking your own photos is customization. I started doing this because I couldn’t find the kind of mockups I was looking for in format or in style. This allows me to control both, but you could use elements of this method an a stock photo of a blank object. You can find photos like that on sites like Unsplash.

Table of Contents

1. Printing a Blank

Section Summary:

  1. Decide on format
  2. Put a grid on the surface you wish to be replaceable by a digital image.
  3. Assemble paper in to book if necessary, or wrap gridded paper around object

The key to this process is making yourself a blank of whatever type of mockup you are looking to create. For my example I’ll be using a digest staple-bound zine.

Later in the process its going to be super useful to have a grid on our key pages so we can make sure we’re realistically mapping our 2D art to our 3D object. On my zine I want to be able to capture the cover and an interior spread. I used a computer and a printer to make a grid on a few pieces of Letter paper, but you could use a calculator (or your brain if ya nasty), a straight edge, and a pencil to get your grid on your paper.

I want one page of my zine to have three vertical sections and four horizontal sections, so I make my full 11 x 8.5 sheet have six vertical sections and four horizontal sections, so when it’s folded I have my desired effect.

After I have my grid on my flat paper, I bind it into the zine, putting the gridded pages in as the cover and as my center spread and using scrap paper to fill out the rest of the zine. The only part of the scrap pages that I’m likely to see are the edges, so they can be whatever scrap I have laying around.

Thought: If you have an obvious center spread like a staple bound zine, you may want to put your grid on some pages that are not the center, so that a spread mockup image doesn’t always have to display the center binding.

A digest zine with a 3 x 4 grid on the cover
My blank zine with grid lines, bound with staples

Wrapping Existing Objects

If you are not doing a type of object that you can easily replicate, such as perfect binding or hard covers, see if you can find an existing product that is the proportions or size that you need. Then you can use blank paper to wrap the book, or insert a gridded page into the interior of the book to act as a fake page spread.

What we want is a blank (with a grid), preferably white surface to make the photoshopping steps simpler.

Thought: I haven’t tested this, but I’ve also considered ordering those free samples from Mixam or another printer and messing with those to make other types of mockups.


If you need Staple Bound Zine Mockups check these out:


2. Taking the Photo

Section Summary:

  1. Take the picture with good even lighting, and on a background that relates to the sort of mockup you’re looking to create.

The great thing about this method is once I have a blank version of something, I can take it out with me and get cool photos that relate to whatever the product will be. Before starting, I make a plan, usually getting composition inspiration from Pinterest.

Photography is really its own beast, and probably the second biggest limiting factor to this process after owning Photoshop (some of this general idea does work in Affinity, but there are some tweaks needed).

Here are some quick tips:

  1. Steady: Use a tripod if you can, or create a stable environment with a stack of books and a phone stand. If you’re shooting by hand tuck in your elbows.
  2. Light: The more even the lighting the better your camera will capture information. If you’re shooting outside try for an overcast day when the clouds are dispersing the light evenly, and shadows are less harsh. If you’re shooting inside try a window and use something white on the opposite side of the window to bounce light back towards you shooting area.
  3. Background: If you want a nice neutral background you can get big ole sheets of paper from office supply stores for very cheap, or decent sized poster board from a craft shop. If you want something exciting, go on a walk in a park, or to a cool library or museum and bring your mockup with you. Antique stores, or Ikea, or the beach – you can take this guy anywhere. Think about what kind of art/images you’re going to be putting on the mockup and consider what goes well with it.

Tip: Top down photos are really common for mockups and are also the easiest for you to get. You’re shooting the mockup pretty straight on so the pages are about as squared off as they can be. This means less to mess with later in the digital steps.

Don’t rush the photo taking, its hard to make a good mockup with a bad photo, especially one with poor lighting.

3. Photoshop

I create my photoshop file by opening the base photo I plan to use. (This is after I’ve edited the colors of the photo in Lightroom, mostly because I find it easier to use, but you can do that step in Photoshop).

First Step! Duplicate the layer! You always want to work with the ability to go back and retrieve any pixels or information from your original photo. This is referred to as working losslessly.

Smart Object & Warp

Section Summary:

  1. Duplicate the original photo
  2. Create a rectangle the proportions of a single page of your book (ex: 5.5 inches wide by 8.5 inches tall for Digest books)
  3. Right click the layer and “Convert to Smart Object”
  4. Edit> Free Transform> SHIFT scale to match the image roughly. Enter
  5. Edit> Transform> Warp
  6. On top Options bar, change grid to match the grid you printed on the page
  7. Move Nodes (setting the layer to a lower opacity helps here)
  8. Adjust Node Arms to match grid lines
  9. Enter and reset opacity to 100%
  10. Repeat for other page(s)
  11. If necessary mask out anything that passes in front of the mockup object.

The main thing that makes this a re-uable mockup is Photoshop’s Smart Object feature.

To create a smart object, I start by choosing the rectangle tool, then clicking once to bring up the dialogue box that lets me define the exact size of my rectangle. This allows me to put in the ratio of a single page, in my case 5.5 inches wide by 8.5 inches tall. Hit enter.

Tip: make the color of the rectangle way different than the paper so its distinguishable.

Then in the layers panel, right-click the rectangle layer and choose “Convert to Smart Object”. While you’re there name your layer which page (left or right) it is going to represent.

If you want to scale the rectangle make sure to use the SHIFT key to constrain the proportions. I want to get it close to the picture, in scale and location.

Next we’re going to warp the Smart Object to match the exact shape of the page.

Tip: set the layer to a lower opacity to make this next step way easier.

With the Smart Object layer selected go to Edit> Transform> Warp. In the top bar (Windows> Options) change the grid of the warp to match the grid of your printed blank. You may need to use the custom grid option.

A screenshot of the warp mesh transformation in effect on a rectangle. A dialogue box shows that the mesh has a custom grid of 3 by 4 applied to it.

Move the Nodes to match up with the corners of the page, and the places where the grid printed on the paper cross. Each Node has four arms that affect the curves between the nodes, use these to make the lines of the grid match the lines of between the Nodes. Hit enter and remember to turn the opacity back to 100% or you’ll get really frustrated later when everything looks weird.

Repeat for other pages.

If you have anything in your image that crosses in front of the object, after you’ve created your Smart Object layers, you can mask out anything that crosses in front of the object. This can be easier than forming the smart object around this object.

There are a few ways to do this, but since we already have our Smart Object, it will be easy to create a mask and then paint out the object. Start by selecting the Smart Object layer that will interact with the object crossing in front of it. Create a mask on this layer by clicking the icon at the bottom of the layers panel that is a rectangle with a circle missing inside. Now click the mask (it will be a solid white box). Now make sure that you have true black as your foreground color. Activate the brush tool by using the “B” key or selecting it from the tool bar. Set your brush to as hard or soft as you’d like, and then paint over the object that crosses in front of our mockup.

Cleaning up the Surface

Section Summary:

  1. Remove the lines of the grid from the object
  2. Mask the object apart from the background
  3. Optional: Create a layer with the object hidden and the background showing

Next we’ll remove the grid lines so we have a blank page again to work with.

I start by labeling my “Background Copy” layer and renaming it something like “Just Book no lines”.

Using whatever method you like remove the lines from the page. I do this using the Patch Tool, but you could try the clone stamp tool too. I find with the Patch Tool this is a pretty quick step.

With this same layer chosen we’re going to mask just the book. Using your favorite select tool (I prefer the Polygon lasso for this) I’ll select the entire book, but not anything that comes in front of it. With that selected I choose the layer mask button in the bottom of the layers panel (the rectangle with a circle cut out icon). So now my layers are locked background og photo, above that is a background copy, and above that is my masked book with no lines. Above those are any smart objects I created.

Optional: I can use this method to select everything but the book in case I want to mess with those colors later. To do that, I’m going to duplicate my original image layer. Then Command+click on Mac (PC – Control+Click) the mask of the “Just Book” layer. That should re-select the book, then I’m going to inverse my selection so I’m selecting everything BUT the book, and with the Background copy layer still selected create a Layer Mask. Rename this to something like “Just Background”.

Shadows and Highlights

Section Summary:

  1. Create three layers that consist of just the blank object pixels, one for shadows, one for mid-tones, and one for highlights
  2. Move these three lighting layers above the smart object layer(s)
  3. Add a Hue/Saturation and Levels adjustment layer for each lighting layer and set them to clipping mask their lighting layer.
    • “Shadows” Hue/Saturation layer: Hue 0, Saturation -100,
    • “Shadows” Levels layer: Output levels 13 and 214
    • “Midtones” Hue/Saturation layer: Hue 0, Saturation -100,
    • “Midtones” Levels layer: Output levels 15 and 53
    • “Highlights” Hue/Saturation layer: Hue 0, Saturation -100,
    • “Highlights” Levels layer: Output levels 185 and 255
  4. Change the Blend mode of the three Lighting layers
    • “Shadows” book Layer: Blend Mode-Darken, Opacity 39%
    • “Midtones” book Layer: Blend Mode-Soft Light, Opacity 26%
    • “Highlights” book Layer: Blend Mode-Screen, Opactiy 4%

Next we’re going to want to use the plain book to overlay the shadows and highlights onto our digital image to recreate the realistic lighting from the photo we took. We want the art we add to look like it belongs in the same situation as the rest of the image.

I’m going to Command+click (PC: Control+Click) on the mask (the black and white image) of the Just book layer to reselect the book, and then click on the colored image to the left of the mask and copy (Command+C on Mac, Control+C on PC). This should copy just the pixels that make up the book.

Importantly when I paste I want to make sure I paste in place so that the book is precisely in the place it is in the original photo. You can do this by right clicking and choosing paste in place or Command+Shift+V (PC: Control+Shift+V). Then I’ll click on the newly pasted book layer and duplicate it twice (Command+J on Mac or Control+J on PC). Name the lowest of these three layers “Shadows”, the middle one “Midtones”, and the top one “Highlights”.

Arrange the layers so that the Smart Object layers are beneath the Shadows, Midtones, and Highlights layers. If you want to get fancy, you can use Command+J (PC: Control+J) to Duplicate the Smart Object layer(s) and keep those at the top of the layers list but with visibility turned off. This makes them easy to find when you want to use the mockup to replace the art later.

Next we want to add some adjustment layers over each of these lighting layers. You can add an adjustment layer using the circle split in half icon at the bottom of the layers panel. Click that icon and choose “Hue/Saturation”. Create three Hue/Saturation adjustment layers and put one over each of the lighting layers. Then right click on each and choose “Create Clipping Mask” so that an arrow appears on the left of the layer pointing over and down to the lighting layer beneath it.

We’re going to do that again with a “Levels” adjustment layer for each lighting layer, clipped to it above the Hue/Saturation layers.

Ok now to actually adjust the adjustment layers. I like to desaturate the book so that it’s color doesn’t affect the color of the digital art layer. Set Saturation to -100.

As for the Levels layers to be honest this is the part of the process I took from another tutorial, so I don’t know the “why” but I invite you to play with the sliders and see what looks good.

Now the magic!

It helps to at this step to have real art in the smart object so you can get a sense for what it actually will look like. To replace things on the smart layer just double click the thumbnail of the layer, which opens up a new Photoshop file. Drag in you artwork or a screenshot of your page and save the file then close it.

Once you have some real images in your smart object layers we’re going to change the blending modes and opacity of our lighting layers. Here’s my settings, again feel free to tweak from here:

  • Shadows book Layer: Blend Mode-Darken, Opacity 39%
  • Midtones book Layer: Blend Mode-Soft Light, Opacity 26%
  • Highlights book Layer: Blend Mode-Screen, Opactiy 4%

Because our smart object layers are below these layers the blending modes let the art through, but give it the shadows and highlights from the original photograph, making the lighting perfectly match the original setting.

Then I save the file as a .tiff so I can come back to these layers when I want.

Final Results

Here’s what my final layers panel looks like:

And now you can go to the Smart Object layers anytime and change the art. Just make sure that you hit save before you close that additional file.

You should now have a reusable mockup using a photo.

As for what’s next for me, I plan to update this post or make a new one covering the differences in this process if you’re using Affinity. I also have a longer article about taking product photography with your phone. If you’re interested in getting notified when we post new blogs like these then follow @graftbound.bsky.social on Bluesky to get notice of when those come out.